MS密封膠增塑劑含量對擴散性能的影響

發布時間 : 2024-9-27 12:35:07
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

MS密封膠增塑劑含量對擴散性能的影響

發布時間 : 2024-9-27 12:35:07
Views:

Information

此外，從圖Sb)可以看出，當溫度t趨向0時，三者的擴散系數D也將接近于0;而隨著溫度t的升高，白油擴散系數D的增長趨勢是最大的。與白油相比，雙端乙烯基硅油擴散系數D的增長趨勢最平緩，甲基硅油居中。因此，這也說明雙端乙烯基硅油具有更好的抗遷移能力，且這一抗遷移能力在高溫時更加顯著。

MS密封膠增塑劑含量往往對其遷移過程具有重要影響。為研究MS密封膠增塑劑含量在MS密封膠體系中擴散性能的影響，以MS密封膠作為擴散基體，在溫度為298 K、壓強為0.000 1 GPa條件下，計算MS密封膠增塑劑在混合體系中質量分數分別為10%,20%,30%和40%時的擴散性能。MS密封膠/白油、MS密封膠/甲基硅油和MS密封膠/雙端乙烯基硅油3種混合體系中截取線性較好的100600 p、均方位移曲線，如圖6所示。白油、甲基硅油和雙端乙烯基硅油在不同含量下IISD-t曲線的擬合直線方程如表3所示。利用MS密封膠增塑劑白油、甲基硅油和雙端乙烯基硅油在不同溫度下的擴散系數條形圖，對3種MS密封膠增塑劑擴散系數進一步采用指數擬合得到擴散系數D與MS密封膠增塑劑含量關系的曲線擬合方程，如圖7所示。http://www.caffertyclinic.com/

Scan the QR code to read on your phone

上一篇: 溫度對丁基防水嵌縫膠增塑劑擴散性能的影響

下一篇: 硅烷改性聚氨酯密封膠增塑劑含量對體系分子間相互作用的影響

上一篇: 溫度對丁基防水嵌縫膠增塑劑擴散性能的影響

下一篇: 硅烷改性聚氨酯密封膠增塑劑含量對體系分子間相互作用的影響