建筑幕墻接縫MS密封膠和結構粘結密封設計

發布時間 : 2022-11-28 17:56:01
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

建筑幕墻接縫MS密封膠和結構粘結密封設計

發布時間 : 2022-11-28 17:56:01
Views:

Information

建筑幕墻各構件之間由于其材料不同，所以各材料之間要留有一定接縫，為此對這些接縫處理是保證建筑幕墻性能的關鍵，幕墻材料之間的接縫一種是通過機械連接并輔以密封材料，另一種是通過結構粘接而實現的，而接縫必須有一定抗變形位移能力，所以幕墻接縫MS密封膠位移能力級別應符合設計位移量的要求，不宜小于20級，并且按相關標準規范選擇MS密封膠又必須在有效期內使用。

建筑幕墻接縫密封主要是幕墻所用材料之間和幕墻與建筑結構之間的接縫密封。接縫密封設計首先確定接縫的構造、位置和接縫寬度，計算出接縫的位移量，然后根據接縫密封材料具有的位移能力進行修正，設計出安全的接縫寬度。

確定接縫位移量，設計必須首先給定構件的長度或體積，確定在接縫部位可能發生的位移變化，即接縫的位移量。最大溫差位移量:

式中:

L—長邊尺寸;

OT一最大溫差;

—熱膨脹系數。

例1:玻璃2100mmx 1 SOOmm

DL=2100x 1 x 10-Sx80=1.68mm

初選膠縫寬8mm , 20LMMS密封膠，其膠縫最大變位8x20=1.6mm<1.68mm;

改用膠縫寬8mm , 25 LMMS密封膠，其膠縫最大變位8x25=2.Omm>1.68mm;

或改用膠縫寬10(9)mm , 20LMMS密封膠，其膠縫最大變位10x20=2.Omm> 1.68mm ;

例2:單層鋁板1 SOOmmx 1200mm